#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include "mytypes.h"
#include "depacker_dirty.h"
#include "getfaraddress.h"
#include "pins.h"
#include "main.h"
#include "ps2.h"
#include "zx.h"
#include "spi.h"
#include "rs232.h"
#include "rtc.h"
#include "atx.h"
#include "joystick.h"
#include "tape.h"
#include "kbmap.h"
//if want Log than comment next string
#undef LOGENABLE
/** FPGA data pointer [far address] (linker symbol). */
extern ULONG fpga PROGMEM;
// FPGA data index..
volatile ULONG curFpga;
// Common flag register.
volatile UBYTE flags_register;
volatile UBYTE flags_ex_register;
// Common modes register.
volatile UBYTE modes_register;
// Buffer for depacking FPGA configuration.
// You can USED for other purposed after setup FPGA.
UBYTE dbuf[DBSIZE];
void put_buffer(UWORD size)
{
// writes specified length of buffer to the output
UBYTE * ptr = dbuf;
do
{
spi_send( *(ptr++) );
} while(--size);
}
void hardware_init(void)
{
//Initialized AVR pins
cli(); // disable interrupts
// configure pins
PORTG = 0b11111111;
DDRG = 0b00000000;
// PORTF = 0b11110000; // ATX off (zero output), fpga config/etc inputs
DDRF = 0b00001000;
PORTE = 0b11111111;
DDRE = 0b00000000; // inputs pulled up
PORTD = 0b11111111;
DDRD = 0b00000000; // same
PORTC = 0b11011111;
DDRC = 0b00000000; // PWRGOOD input, other pulled up
PORTB = 0b11110001;
DDRB = 0b10000111; // LED off, spi outs inactive
PORTA = 0b11111111;
DDRA = 0b00000000; // pulled up
ACSR = 0x80; // DISABLE analog comparator
}
int main()
{
start:
hardware_init();
rs232_init();
#ifdef LOGENABLE
to_log("VER:");
{
UBYTE b,i;
ULONG version = 0x1DFF0;
char VER[]="..";
for( i=0; i<12; i++)
{
dbuf[i] = pgm_read_byte_far(version+i);
}
dbuf[i]=0;
to_log((char*)dbuf);
to_log(" ");
UBYTE b1 = pgm_read_byte_far(version+12);
UBYTE b2 = pgm_read_byte_far(version+13);
UBYTE day = b1&0x1F;
UBYTE mon = ((b2<<3)+(b1>>5))&0x0F;
UBYTE year = (b2>>1)&0x3F;
VER[0] = '0'+(day/10);
VER[1] = '0'+(day%10);
to_log(VER);
to_log(".");
VER[0] = '0'+(mon/10);
VER[1] = '0'+(mon%10);
to_log(VER);
to_log(".");
VER[0] = '0'+(year/10);
VER[1] = '0'+(year%10);
to_log(VER);
to_log("\r\n");
//
for( i=0; i<16; i++)
{
b = pgm_read_byte_far(version+i);
VER[0] = ((b >> 4) <= 9 )?'0'+(b >> 4):'A'+(b >> 4)-10;
VER[1] = ((b & 0x0F) <= 9 )?'0'+(b & 0x0F):'A'+(b & 0x0F)-10;
to_log(VER);
}
to_log("\r\n");
}
#endif
wait_for_atx_power();
spi_init();
DDRF |= (1<<nCONFIG); // pull low for a time
_delay_us(40);
DDRF &= ~(1<<nCONFIG);
while( !(PINF & (1<<nSTATUS)) ); // wait ready
curFpga = GET_FAR_ADDRESS(fpga); // prepare for data fetching
#ifdef LOGENABLE
{
char log_fpga[]="F........\r\n";
UBYTE b = (UBYTE)((curFpga>>24)&0xFF);
log_fpga[1] = ((b >> 4) <= 9 )?'0'+(b >> 4):'A'+(b >> 4)-10;
log_fpga[2] = ((b & 0x0F) <= 9 )?'0'+(b & 0x0F):'A'+(b & 0x0F)-10;
b = (UBYTE)((curFpga>>16)&0xFF);
log_fpga[3] = ((b >> 4) <= 9 )?'0'+(b >> 4):'A'+(b >> 4)-10;
log_fpga[4] = ((b & 0x0F) <= 9 )?'0'+(b & 0x0F):'A'+(b & 0x0F)-10;
b = (UBYTE)((curFpga>>8)&0xFF);
log_fpga[5] = ((b >> 4) <= 9 )?'0'+(b >> 4):'A'+(b >> 4)-10;
log_fpga[6] = ((b & 0x0F) <= 9 )?'0'+(b & 0x0F):'A'+(b & 0x0F)-10;
b = (UBYTE)(curFpga&0xFF);
log_fpga[7] = ((b >> 4) <= 9 )?'0'+(b >> 4):'A'+(b >> 4)-10;
log_fpga[8] = ((b & 0x0F) <= 9 )?'0'+(b & 0x0F):'A'+(b & 0x0F)-10;
to_log(log_fpga);
}
#endif
depacker_dirty();
#ifdef LOGENABLE
to_log("depacker_dirty OK\r\n");
#endif
//power led OFF
LED_PORT |= 1<<LED;
// start timer (led dimming and timeouts for ps/2)
TCCR2 = 0b01110011; // FOC2=0, {WGM21,WGM20}=01, {COM21,COM20}=11, {CS22,CS21,CS20}=011
// clk/64 clocking,
// 1/512 overflow rate, total 11.059/32768 = 337.5 Hz interrupt rate
TIFR = (1<<TOV2);
TIMSK = (1<<TOIE2);
//init some counters and registers
ps2keyboard_count = 12;
ps2keyboard_cmd_count = 0;
ps2keyboard_cmd = 0;
ps2mouse_count = 12;
ps2mouse_initstep = 0;
ps2mouse_resp_count = 0;
ps2mouse_cmd = PS2MOUSE_CMD_SET_RESOLUTION;
flags_register = 0;
flags_ex_register = 0;
modes_register = 0;
//enable mouse
zx_mouse_reset(1);
//set external interrupt
//INT4 - PS2 Keyboard (falling edge)
//INT5 - PS2 Mouse (falling edge)
//INT6 - SPI (falling edge)
//INT7 - RTC (falling edge)
EICRB = (1<<ISC41)+(0<<ISC40) + (1<<ISC51)+(0<<ISC50) + (1<<ISC61)+(0<<ISC60) + (1<<ISC71)+(0<<ISC70); // set condition for interrupt
EIFR = (1<<INTF4)|(1<<INTF5)|(1<<INTF6)|(1<<INTF7); // clear spurious ints there
EIMSK |= (1<<INT4)|(1<<INT5)|(1<<INT6)|(1<<INT7); // enable
kbmap_init();
zx_init();
rtc_init();
#ifdef LOGENABLE
to_log("zx_init OK\r\n");
#endif
sei(); // globally go interrupting
//set led on keyboard
ps2keyboard_send_cmd(PS2KEYBOARD_CMD_SETLED);
//main loop
do
{
tape_task();
ps2mouse_task();
ps2keyboard_task();
zx_task(ZX_TASK_WORK);
zx_mouse_task();
joystick_task();
//event from SPI
if ( flags_register&FLAG_SPI_INT )
{
//get status byte
UBYTE status;
nSPICS_PORT &= ~(1<<nSPICS);
nSPICS_PORT |= (1<<nSPICS);
status = spi_send(0);
zx_wait_task( status );
}
atx_power_task();
}
while( (flags_register&FLAG_HARD_RESET) == 0 );
goto start;
}