Subversion Repositories pentevo

                ifndef  __regf6482inc
__regf6482inc   equ     1
                save
                listing off             ; no listing over this file

;****************************************************************************
;*                                                                          *
;*   AS 1.42 - File F6482.INC                                               *
;*                                                                          *
;*   Contains Bit & Register Definitions for Z8encore! XP F6482             *
;*   Source: Z8 Encore! XP F6482 Series Product Specification, PS029412-0618*
;*                                                                          *
;****************************************************************************

                include "ez8com.inc"

;----------------------------------------------------------------------------
; System Control

PWRCTL0         sfr     0f80h           ; Power Control 0
OpAmpB          __z8bit PWRCTL0,7       ;  Op Amp B Enable
OpAmpA          __z8bit PWRCTL0,6       ;  Op Amp A Enable
LCD             __z8bit PWRCTL0,5       ;  LCD Enable
LVDE            __z8bit PWRCTL0,4       ;  Low-Voltage Detection Enable
TEMP            __z8bit PWRCTL0,3       ;  Temperature Sensor Enable
FRECOV          __z8bit PWRCTL0,2       ;  Fast Recovery
COMP0           __z8bit PWRCTL0,1       ;  Comparator 0 Disable
COMP1           __z8bit PWRCTL0,0       ;  Comparator 1 Disable
PWRCTL1         sfr     0f81h           ; Power Control 1
ADC             __z8bfield PWRCTL1,2,2  ;  ADC and ADC Internal Voltage Reference Buffer Continous Enable
DAC             __z8bit PWRCTL1,1       ;  DAC Enable

CLKCTL0         sfr     0f82h           ; Clock Control 0
CSTAT           __z8bit CLKCTL0,7       ;  Clock System Register Lock Status
SCKFEN          __z8bit CLKCTL0,6       ;  System Clock Failure Detection Enable
SCKDIV          __z8bfield CLKCTL0,3,3  ;  System Clock Division Ratio
SCKSEL          __z8bfield CLKCTL0,0,3  ;  System Clock Source Select
CLKCTL1         sfr     0f83h           ; Clock Control 1
IPORDY          __z8bit CLKCTL1,7       ;  Internal Precision Oscillator (IPO) Ready Flag
WTOFEN          __z8bit CLKCTL1,5       ;  Watchdog Timer Oscillator Failure Detection Enable
PCKSEL          __z8bfield CLKCTL1,3,2  ;  PCLK Source Select
PCKSM           __z8bit CLKCTL1,2       ;  PCLK Stop Mode Operation
LFXOEN          __z8bit CLKCTL1,1       ;  Low Frequency Crystal Oscillator (LFXO) Enable
IPOEN           __z8bit CLKCTL1,0       ;  Internal Precision Oscillator (IPO) Enable
CLKCTL2         sfr     0f84h           ; Clock Control 2
HFXORDY         __z8bit CLKCTL2,7       ;  High Frequency Crystal Oscillator (HFXO) Ready Flag
HFXOBAND        __z8bfield CLKCTL2,2,2  ;  High Frequency Crystal Oscillator (HFXO) Frequency Band
HFXOEN          __z8bit CLKCTL2,0       ;  High Frequency Crystal Oscillator (HFXO) Enable
CLKCTL3         sfr     0f85h           ; Clock Control 3
FLLNDIVH        __z8bfield CLKCTL3,0,8  ;  Frequency Locked Loop (FLL) N-Divider High Byte
CLKCTL4         sfr     0f86h           ; Clock Control 4
FLLNDIVL        __z8bfield CLKCTL4,0,2  ;  Frequency Locked Loop (FLL) N-Divider Low Byte
CLKCTL5         sfr     0f87h           ; Clock Control 5
FLLIRQE         __z8bit CLKCTL5,6       ;  FLL Lost Lock Interrupt Request Enable
FLLLL           __z8bit CLKCTL5,5       ;  FLL Lost Lock
FLLRDY          __z8bit CLKCTL5,4       ;  FLL Ready
FLADONE         __z8bit CLKCTL5,3       ;  FLL Fast Locking Algorithm Done
DCOEN           __z8bit CLKCTL5,2       ;  Digitally Controlled Oscillator (DCO) Enable
SEEDSEL         __z8bit CLKCTL5,1       ;  DCO Seed Select
FLLEN           __z8bit CLKCTL5,0       ;  Frequency Locked Loop (FLL) Enable
CLKCTL6         sfr     0f88h           ; Clock Control 6
DCOCTLH         __z8bfield CLKCTL6,0,8  ;  Digitally Controlled Oscillator (DCO) Control Word High Byte
CLKCTL7         sfr     0f89h           ; Clock Control 7
DCOCTLL         __z8bfield CLKCTL7,0,8  ;  Digitally Controlled Oscillator (DCO) Control Word Low Byte
CLKCTL8         sfr     0f8ah           ; Clock Control 8
DCOCTLCH        __z8bfield CLKCTL8,0,8  ;  Digitally Controlled Oscillator (DCO) Converged Control Word High Byte
CLKCTL9         sfr     0f8bh           ; Clock Control 9
DCOCTLCL        __z8bfield CLKCTL9,0,8  ;  Digitally Controlled Oscillator (DCO) converged control word Low Byte
CLKCTLA         sfr     0f8ch           ; Clock Control A
PLLNDIV         __z8bfield CLKCTLA,0,8  ;  Phase Locked Loop (PLL) Feedback Division Ratio
CLKCTLB         sfr     0f8dh           ; Clock Control B
PLLRDIV         __z8bfield CLKCTLB,4,4  ;  Phase Locked Loop (PLL) Reference Division Ratio
PLLODIV         __z8bfield CLKCTLB,0,3  ;  Phase Locked Loop (PLL) Output Division Ratio
CLKCTLC         sfr     0f8eh           ; Clock Control C
PLLRDY          __z8bit CLKCTLC,7       ;  Phase Locked Loop (PLL) Ready Flag
PLLSEL          __z8bit CLKCTLC,1       ;  PLL Source Select
PLLEN           __z8bit CLKCTLC,0       ;  Phased Locked Loop (PLL) Enable

TRMADR          sfr     0ff6h           ; Trim Bit Address
TRMDR           sfr     0ff7h           ; Trim Data

;----------------------------------------------------------------------------
; Flash Options

OPTIONS0        label   0000h
WDT_RES         __z8cbit OPTIONS0,7     ;  Watchdog Timer Reset
WDT_AO          __z8cbit OPTIONS0,6     ;  Watchdog Timer Always On
VBOCTL          __z8cbfield OPTIONS0,2,2 ;  Voltage Brown-Out Protection Control
FRP             __z8cbit OPTIONS0,1     ;  Flash Read Protect
FWP             __z8cbit OPTIONS0,0     ;  Flash Write Protect
OPTIONS1        label   0001h

;----------------------------------------------------------------------------
; Interrupts Vectors

RESET_vect      label   0002h           ; Reset (not an interrupt)
WDT_vect        label   0004h           ; Watchdog Timer
ILL_INST_vect   label   0006h           ; Illegal Instruction Trap (not an interrupt)
TIMER2_vect     label   0008h           ; Timer 2
TIMER1_vect     label   000ah           ; Timer 1
TIMER0_vect     label   000ch           ; Timer 0
UART0_RX_vect   label   000eh           ; UART 0 Receiver
UART0_TX_vect   label   0010h           ; UART 0 Transmitter
USB_vect        label   0012h           ; USB
USB_RESUME_vect label   0014h           ; USB Resume
I2C_vect        label   0016h           ; I2C
SPI1_vect       label   0018h           ; SPI1
DAC_vect        label   001ah           ; DAC
DMA1_vect       label   001ch           ; DMA1
DMA0_vect       label   001eh           ; DMA0
ADC_vect        label   0020h           ; ADC
SPI0_vect       label   0022h           ; SPI0
LCD_vect        label   0024h           ; LCD
RTC_vect        label   0026h           ; RTC
A7_vect         label   0028h           ; Port A7, selectable rising or falling input edge, or LVD
A6_vect         label   002ah           ; Port A6, selectable rising or falling input edge or Comparator 0 Output
A5_vect         label   002ch           ; Port A5, selectable rising or falling input edge or Comparator 1 Output
A4_vect         label   002eh           ; Port A4 or Port D4, selectable rising or falling input edge
A3_vect         label   0030h           ; Port A3 or Port D3, selectable rising or falling input edge
A2_vect         label   0032h           ; Port A2 or Port D2, selectable rising or falling input edge
A1_vect         label   0034h           ; Port A1 or Port D1, selectable rising or falling input edge
A0_vect         label   0036h           ; Port A0, selectable rising or falling input edge
AES_vect        label   0038h           ; AES
MCT_vect        label   003ah           ; Multi-Channel Timer
UART1_RX_vect   label   003ch           ; UART 1 Receiver
UART1_TX_vect   label   003eh           ; UART 1 Transmitter
C3_vect         label   0040h           ; Port C3, both input edges
DMA3_vect       label   0040h           ; DMA3
C2_vect         label   0042h           ; Port C2, both input edges
DMA2_vect       label   0042h           ; DMA2
C1_vect         label   0044h           ; Port C1, both input edges
C0_vect         label   0046h           ; Port C0, both input edges
SYSCLK_vect     label   0048h           ; System Clock Fail (not an interrupt)
WDGOSC_vect     label   004ah           ; Watchdog Timer Oscillator Fail (not an interrupt)

;----------------------------------------------------------------------------
; Interrupts

__defirq        macro   NUM,Base
IRQ{NUM}        sfr     Base+0          ; Interrupt Request n
IRQ{NUM}ENH     sfr     Base+1          ; IRQn Enable High Bit
IRQ{NUM}ENL     sfr     Base+2          ; IRQn Enable Low Bit
                endm

                __defirq "0",0fc0h
                __defirq "1",0fc3h
                __defirq "2",0fc6h
                __defirq "3",0fc9h

T2I             __z8bit IRQ0,7          ;  Timer 2 Interrupt Request
T1I             __z8bit IRQ0,6          ;  Timer 1 Interrupt Request
T0I             __z8bit IRQ0,5          ;  Timer 0 Interrupt Request
U0RXI           __z8bit IRQ0,4          ;  UART 0 Receiver Interrupt Request
U0TXI           __z8bit IRQ0,3          ;  UART 0 Transmitter Interrupt Request
USBI            __z8bit IRQ0,2          ;  USB Interrupt Request
USBRI           __z8bit IRQ0,1          ;  USB Resume Interrupt Request
I2CI            __z8bit IRQ0,0          ;  I2C Interrupt Request

T2ENH           __z8bit IRQ0ENH,7       ;  Timer 2 Interrupt Enable & Priority
T2ENL           __z8bit IRQ0ENL,7
T1ENH           __z8bit IRQ0ENH,6       ;  Timer 1 Interrupt Enable & Priority
T1ENL           __z8bit IRQ0ENL,6
T0ENH           __z8bit IRQ0ENH,5       ;  Timer 0 Interrupt Enable & Priority
T0ENL           __z8bit IRQ0ENL,5
U0RENH          __z8bit IRQ0ENH,4       ;  UART 0 Receive Interrupt Enable & Priority
U0RENL          __z8bit IRQ0ENL,4
U0TENH          __z8bit IRQ0ENH,3       ;  UART 0 Transmit Interrupt Enable & Priority
U0TENL          __z8bit IRQ0ENL,3
USBENH          __z8bit IRQ0ENH,2       ;  USB Interrupt Enable & Priority
USBENL          __z8bit IRQ0ENL,2
USBRENH         __z8bit IRQ0ENH,1       ;  USB Resume Interrupt Enable & Priority
USBRENL         __z8bit IRQ0ENL,1
I2CENH          __z8bit IRQ0ENH,0       ;  I2C Interrupt Enable & Priority
I2CENL          __z8bit IRQ0ENL,0

SPI1I           __z8bit IRQ1,7          ;  SPI1 Interrupt Request
DACI            __z8bit IRQ1,6          ;  DAC Interrupt Request
DMA1I           __z8bit IRQ1,5          ;  DMA1 Interrupt Request
DMA0I           __z8bit IRQ1,4          ;  DMA0 Interrupt Request
ADCI            __z8bit IRQ1,3          ;  ADC Interrupt Request
SPI0I           __z8bit IRQ1,2          ;  SPI0 Interrupt Request
LCDI            __z8bit IRQ1,1          ;  LCD Interrupt Request
RTCI            __z8bit IRQ1,0          ;  RTC Interrupt Request

SPI1ENH         __z8bit IRQ1ENH,7       ;  SPI1 Interrupt Enable & Priority
SPI1ENL         __z8bit IRQ1ENL,7
DACENH          __z8bit IRQ1ENH,6       ;  DAC Interrupt Enable & Priority
DACENL          __z8bit IRQ1ENL,6
DMA1ENH         __z8bit IRQ1ENH,5       ;  DMA1 Interrupt Enable & Priority
DMA1ENL         __z8bit IRQ1ENL,5
DMA0ENH         __z8bit IRQ1ENH,4       ;  DMA0 Interrupt Enable & Priority
DMA0ENL         __z8bit IRQ1ENL,4
ADCENH          __z8bit IRQ1ENH,3       ;  ADC Interrupt Enable & Priority
ADCENL          __z8bit IRQ1ENL,3
SPI0ENH         __z8bit IRQ1ENH,2       ;  SPI0 Interrupt Enable & Priority
SPI0ENL         __z8bit IRQ1ENL,2
LCDENH          __z8bit IRQ1ENH,1       ;  LCD Interrupt Enable & Priority
LCDENL          __z8bit IRQ1ENL,1
RTCENH          __z8bit IRQ1ENH,0       ;  RTC Interrupt Enable & Priority
RTCENL          __z8bit IRQ1ENL,0

PA7VI           __z8bit IRQ2,7          ;  Port A7 or LVD Interrupt Request
PA6CI           __z8bit IRQ2,6          ;  Port A6 or Comparator 0 Interrupt Request
PA5CI           __z8bit IRQ2,5          ;  Port A5 or Comparator 1 Interrupt Request
PA4DI           __z8bit IRQ2,4          ;  Port A4 or Port D4 Interrupt Request
PA3DI           __z8bit IRQ2,3          ;  Port A3 or Port D3 Interrupt Request
PA2DI           __z8bit IRQ2,2          ;  Port A2 or Port D2 Interrupt Request
PA1DI           __z8bit IRQ2,1          ;  Port A1 or Port D1 Interrupt Request
PA0I            __z8bit IRQ2,0          ;  Port A0 Interrupt Request

PA7VENH         __z8bit IRQ2ENH,7       ;  Port A7 or LVD Interrupt Enable & Priority
PA7VENL         __z8bit IRQ2ENL,7
PA6C0ENH        __z8bit IRQ2ENH,6       ;  Port A6 or Comparator 0 Interrupt Enable & Priority
PA6C0ENL        __z8bit IRQ2ENL,6
PA5C1ENH        __z8bit IRQ2ENH,5       ;  Port A5 or Comparator 1 Interrupt Enable & Priority
PA5C1ENL        __z8bit IRQ2ENL,5
PAD4ENH         __z8bit IRQ2ENH,4       ;  Port A4 or Port D4 Interrupt Enable & Priority
PAD4ENL         __z8bit IRQ2ENL,4
PAD3ENH         __z8bit IRQ2ENH,3       ;  Port A3 or Port D3 Interrupt Enable & Priority
PAD3ENL         __z8bit IRQ2ENL,3
PAD2ENH         __z8bit IRQ2ENH,2       ;  Port A2 or Port D2 Interrupt Enable & Priority
PAD2ENL         __z8bit IRQ2ENL,2
PAD1ENH         __z8bit IRQ2ENH,1       ;  Port A1 or Port D1 Interrupt Enable & Priority
PAD1ENL         __z8bit IRQ2ENL,1
PAD0ENH         __z8bit IRQ2ENH,0       ;  Port A0 Interrupt Enable & Priority
PAD0ENL         __z8bit IRQ2ENL,0

AESI            __z8bit IRQ3,7          ;  AES Interrupt Request
MCTI            __z8bit IRQ3,6          ;  Multi-Channel Timer Interrupt Request
U1RXI           __z8bit IRQ3,5          ;  UART 1 Receiver Interrupt Request
U1TXI           __z8bit IRQ3,4          ;  UART 1 Transmitter Interrupt Reques
PC3I            __z8bit IRQ3,3          ;  Port C3 or...
DMA3I           __z8bit IRQ3,3          ;  DMA 3 Interrupt Request
PC2I            __z8bit IRQ3,2          ;  Port C2 or...
DMA2I           __z8bit IRQ3,2          ;  DMA 2 Interrupt Request
PC1I            __z8bit IRQ3,1          ;  Port C1 Interrupt Request
PC0I            __z8bit IRQ3,0          ;  Port C0 Interrupt Request

AESENH          __z8bit IRQ3ENH,7       ;  AES Interrupt Enable & Priority
AESENL          __z8bit IRQ3ENL,7
MCTENH          __z8bit IRQ3ENH,6       ;  Multi-Channel Timer Interrupt Enable & Priority
MCTENL          __z8bit IRQ3ENL,6
U1RENH          __z8bit IRQ3ENH,5       ;  UART1 Receive Interrupt Enable & Priority
U1RENL          __z8bit IRQ3ENL,5
U1TENH          __z8bit IRQ3ENH,4       ;  UART1 Transmit Interrupt Enable & Priority
U1TENL          __z8bit IRQ3ENL,4
C3ENH           __z8bit IRQ3ENH,3       ;  Port C3 or...
C3ENL           __z8bit IRQ3ENL,3
DMA3ENH         __z8bit IRQ3ENH,3       ;  DMA3  Interrupt Enable & Priority
DMA3ENL         __z8bit IRQ3ENL,3
C2ENH           __z8bit IRQ3ENH,2       ;  Port C2 or...
C2ENL           __z8bit IRQ3ENL,2
DMA2ENH         __z8bit IRQ3ENH,2       ;  DMA2 Interrupt Enable & Priority
DMA2ENL         __z8bit IRQ3ENL,2
C1ENH           __z8bit IRQ3ENH,1       ;  Port C1 Interrupt Enable & Priority
C1ENL           __z8bit IRQ3ENL,1
C0ENH           __z8bit IRQ3ENH,0       ;  Port C0 Interrupt Enable & Priority
C0ENL           __z8bit IRQ3ENL,0

IRQES           sfr     0fcch           ; Interrupt Edge Select
IRQSS0          sfr     0fcdh           ; Shared Interrupt Select Register 0
PA7VS           __z8bit IRQSS0,7        ;  PA7/LVD Selection
PA6CS           __z8bit IRQSS0,6        ;  PA6/Comparator 0 Selection
PA5CS           __z8bit IRQSS0,5        ;  PA5/Comparator 1 Selection
PAD4S           __z8bit IRQSS0,4        ;  PA4/PD4 Selection
PAD3S           __z8bit IRQSS0,3        ;  PA3/PD3 Selection
PAD2S           __z8bit IRQSS0,2        ;  PA2/PD2 Selection
PAD1S           __z8bit IRQSS0,1        ;  PA1/PD1 Selection
IRQSS1          sfr     0fceh           ; Shared Interrupt Select Register 1
PCDMA3S         __z8bit IRQSS1,3        ;  PC3/DMA3 Selection
PCDMA2S         __z8bit IRQSS1,2        ;  PC2/DMA2 Selection
IRQCTL          sfr     0fcfh           ; Interrupt Control
IRQE            __z8bit IRQCTL,7        ;  Interrupt Request Enable

;----------------------------------------------------------------------------
; Event System

ESSSA           sfr     0f98h           ; Event System Source Subaddress
ESSSD           sfr     0f99h           ; Event System Source Subdata
CHSRCSEL        __z8bfield ESSSD,0,7    ;  Event System Channel Source Selection
ESDSA           sfr     0f9ah           ; Event System Destination Subaddress
ESDSD           sfr     0f9bh           ; Event System Destination Subdata
DSTCON          __z8bit ESDSD,3         ;  Event System Destination Connection
DSTCHSEL        __z8bfield ESDSD,0,3    ;  Event System Destination Channel Selection

;----------------------------------------------------------------------------
; Flash Memory Control

FCTL            sfr     0ff8h           ; Flash Control
FCMD            __z8bfield FCTL,0,8     ;  Flash Command
FSTAT           sfr     0ff8h           ; Flash Status
FPS             sfr     0ff9h           ; Flash Page Select
INFO_EN         __z8bit FPS,7           ;  Information Area Enable
PAGE            __z8bfield FPS,0,7      ;  Page Select
FPROT           sfr     0ff9h           ; Flash Sector Protect
FPCONFIG        sfr     0ffah           ; Flash Programming Configuration
PMODE           __z8bit FPCONFIG,0      ;  Programming Mode

;----------------------------------------------------------------------------
; GPIO

                __defgpio "A",0fd0h
                __defgpio "B",0fd4h
                __defgpio "C",0fd8h
                __defgpio "D",0fdch
                __defgpio "E",0fe0h
                __defgpio "F",0fe4h
                __defgpio "G",0fe8h
                __defgpio "H",0fech
                __defgpio "J",0fbch

;----------------------------------------------------------------------------
; LED Controller

LEDEN           sfr     0f82h           ; LED Drive Enable
LEDLVLH         sfr     0f83h           ; LED Drive Level High
LEDLVLL         sfr     0f84h           ; LED Drive Level Low

;----------------------------------------------------------------------------
; Timer

__defmytimer    macro   NUM,Base,Base2,Base3
                __deftimer NUM,Base,1,0
T{NUM}MODE3     equ     T{NUM}MODEHI
T{NUM}PWM1H     sfr     Base2+0         ; Timer PWM1 High Byte
T{NUM}PWM1L     sfr     Base2+1         ; Timer PWM1 Low Byte
T{NUM}PWM1      sfr     T{NUM}PWM1H
T{NUM}CTL2      sfr     Base2+2         ; Timer Control 2
T{NUM}PWM0UE    __z8bit T{NUM}CTL2,5    ;  PWM0 Update Enable
T{NUM}TPOLHI    __z8bit T{NUM}CTL2,4    ;  Timer Input/Output Polarity High Bit
T{NUM}OUTCTL    __z8bit T{NUM}CTL2,2    ;  Timer Output Control
T{NUM}TCLKS     __z8bfield T{NUM}CTL2,0,2 ;  Timer Clock Source
T{NUM}STAT      sfr     Base2+3         ; Timer Status
T{NUM}NEF       __z8bit T{NUM}STAT,7    ;  Noise Event Flag
T{NUM}PWM1EO    __z8bit T{NUM}STAT,5    ;  PWM 1 Event Overrun
T{NUM}PWM0EO    __z8bit T{NUM}STAT,4    ;  PWM 0 Event Overrun
T{NUM}RTOEF     __z8bit T{NUM}STAT,3    ;  Reload Time-Out Event Flag
T{NUM}PWM1EF    __z8bit T{NUM}STAT,1    ;  PWM 1 Event Flag
T{NUM}PWM0EF    __z8bit T{NUM}STAT,0    ;  PWM 0 Event Flag
T{NUM}NFC       sfr     Base3+0         ; Timer Noise Filter Control
T{NUM}NFCTL     __z8bfield T{NUM}NFC,4,4 ;  Noise Filter Control
T{NUM}NFCON     __z8bit T{NUM}NFC,7     ;  Noise Filter Connection
                endm

                __defmytimer "0",0f00h,0f20h,0f2ch
                __defmytimer "1",0f08h,0f24h,0f2dh
                __defmytimer "2",0f10h,0f28h,0f2eh

;----------------------------------------------------------------------------
; RTC

RTC_SEC         sfr     0f30h           ; Real-Time Clock Seconds
TEN_SEC         __z8bfield RTC_SEC,4,3  ;  Current Seconds Tens
SEC             __z8bfield RTC_SEC,0,4  ;  Current Seconds Ones
RTC_MIN         sfr     0f31h           ; Real-Time Clock Minutes
TEN_MIN         __z8bfield RTC_MIN,4,3  ;  Current Minutes Tens
MIN             __z8bfield RTC_MIN,0,4  ;  Current Minutes Ones
RTC_HRS         sfr     0f32h           ; Real-Time Clock Hours
TEN_HRS         __z8bfield RTC_HRS,4,2  ;  Current Hours Tens
HRS             __z8bfield RTC_HRS,0,4  ;  Current Hours Ones
RTC_DOM         sfr     0f33h           ; Real-Time Clock Day-of-the-Month
TENS_DOM        __z8bfield RTC_DOM,4,2  ;  Current Day Of The Month Tens
DOM             __z8bfield RTC_DOM,0,4  ;  Current Day Of The Month Ones
RTC_DOW         sfr     0f34h           ; Real-Time Clock Day-of-the-Week
DOW             __z8bfield RTC_DOW,0,3  ;  Current Day Of The Week
RTC_MON         sfr     0f35h           ; Real-Time Clock Month
TENS_MON        __z8bfield RTC_MON,4,1  ;  Current Month Tens
MON             __z8bfield RTC_MON,0,3  ;  Current Month Ones
RTC_YR          sfr     0f36h           ; Real-Time Clock Year
TENS_YR         __z8bfield RTC_YR,4,4   ;  Current Year Tens
YR              __z8bfield RTC_YR,0,4   ;  Current Year Ones
RTC_ASEC        sfr     0f37h           ; Real-Time Clock Alarm Seconds
ATEN_SEC        __z8bfield RTC_ASEC,4,3 ;  Alarm Seconds Tens
ASEC            __z8bfield RTC_ASEC,0,4 ;  Alarm Seconds Ones
RTC_AMIN        sfr     0f38h           ; Real-Time Clock Alarm Minutes
ATEN_MIN        __z8bfield RTC_AMIN,4,3 ;  Alarm Minutes Tens
AMIN            __z8bfield RTC_AMIN,0,4 ;  Alarm Minutes Ones
RTC_AHRS        sfr     0f39h           ; Real-Time Clock Alarm Hours
ATEN_HRS        __z8bfield RTC_AHRS,4,2 ;  Alarm Hours Tens
AHRS            __z8bfield RTC_AHRS,0,4 ;  Alarm Hours Ones
RTC_ADOM        sfr     0f3ah           ; Real-Time Clock Alarm Day-of-the-Month
ATEN_DOM        __z8bfield RTC_ADOM,4,2 ;  Alarm Day Of The Month Tens
ADOM            __z8bfield RTC_ADOM,0,4 ;  Alarm Day Of The Month Ones
RTC_ADOW        sfr     0f3bh           ; Real-Time Clock Alarm Day-of-the-Week
ADOW            __z8bfield RTC_ADOW,0,3 ;  Alarm Day Of The Week
RTC_ACTRL       sfr     0f3ch           ; Real-Time Clock Alarm Control
ADOM_EN         __z8bit RTC_ACTRL,4     ;  Alarm Day Of The Month Enable
ADOW_EN         __z8bit RTC_ACTRL,3     ;  Alarm Day Of The Week Enable
AHRS_EN         __z8bit RTC_ACTRL,2     ;  Alarm Hours Enable
AMIN_EN         __z8bit RTC_ACTRL,1     ;  Alarm Minutes Enable
ASEC_EN         __z8bit RTC_ACTRL,0     ;  Alarm Seconds Enable
RTC_TIM         sfr     0f3eh           ; Real-Time Clock Timing
RTC_PRESCALE    __z8bfield RTC_TIM,4,3  ;  RTC Prescale
FREQ_SEL        __z8bfield RTC_TIM,2,2  ;  RTC Frequency Select
CLK_SEL         __z8bfield RTC_TIM,0,2  ;  RTC Source Select
RTC_CTRL        sfr     0f3fh           ; Real-Time Clock Control
SYNC            __z8bit RTC_CTRL,7      ;  RTC Synchronize
ALARM           __z8bit RTC_CTRL,6      ;  RTC Alarm
BCD_EN          __z8bit RTC_CTRL,4      ;  Binary Coded Decimal Enable
RTC_MODE        __z8bit RTC_CTRL,3      ;  RTC Mode
DAY_SAV         __z8bit RTC_CTRL,1      ;  Daylight Savings Time
RTC_LOCK        __z8bit RTC_CTRL,0      ;  RTC Count Lock

;----------------------------------------------------------------------------
; Multi-Channel Timer

                __defmct

;----------------------------------------------------------------------------
; DMA

__defdma        macro   NUM,Base
DMA{NUM}SA      sfr     Base+0          ; DMA Subaddress/Status
IRQS{NUM}       __z8bit DMA{NUM}SA,7    ;  Interrupt Request Status
LLACT{NUM}      __z8bit DMA{NUM}SA,5    ;  Linked List Active
ACT{NUM}        __z8bit DMA{NUM}SA,4    ;  DMA Active
DMA{NUM}SD      sfr     Base+1          ; DMA Subdata
DMA{NUM}SRCH    equ     0                ; DMA Source Address High
TXLIST{NUM}     __z8bit DMA{NUM}SD,7    ;  Transfer In List
DMA{NUM}SRCL    equ     1               ; DMA Source Address Low
DMA{NUM}DSTH    equ     2               ; DMA Destination Address High
DMA{NUM}DSTL    equ     3               ; DMA Destination Address Low
DMA{NUM}CNTH    equ     4               ; DMA Count High
WMCNT{NUM}      __z8bfield DMA{NUM}SD,4,4 ;  Watermark Count
DMA{NUM}CNTL    equ     5               ; DMA Count Low
DMA{NUM}CTL0    equ     6               ; DMA Control 0
LLCTL{NUM}      __z8bfield DMA{NUM}SD,6,2 ;  Linked List Control
EOCIRQE{NUM}    __z8bit DMA{NUM}SD,5    ;  End-of-Count Interrupt Request Enable
HALT{NUM}       __z8bit DMA{NUM}SD,4    ;  Halt Upon Descriptor Completion
DSTCTL{NUM}     __z8bfield DMA{NUM}SD,2,2 ;  Destination Address Control
SRCCTL{NUM}     __z8bfield DMA{NUM}SD,0,2 ;  Source Address Control
DMA{NUM}CTL1    equ     7               ; DMA Control 1
ENABLE{NUM}     __z8bit DMA{NUM}SD,7    ;  DMA Channel Enable
REQSEL{NUM}     __z8bfield DMA{NUM}SD,0,5 ;  DMA Requestor Selection
DMA{NUM}LAH     equ     8               ; DMA Linked List Descriptor Address High
DMA{NUM}LAL     equ     9               ; DMA Linked List Descriptor Address Low
                endm
                
                __defdma "0",0fa8h
                __defdma "1",0faah
                __defdma "2",0fach
                __defdma "3",0faeh
                
DMACTL          sfr     0fb0h           ; DMA Control
GDISABLE        __z8bit DMACTL,7        ;  DMA Global Disable
PRIORITY        __z8bit DMACTL,6        ;  DMA Priority Select
BURST           __z8bfield DMACTL,4,2   ;  Burst Transfers
AUTOINC         __z8bit DMACTL,2        ;  Autoincrement Enable
CHAIN32         __z8bit DMACTL,1        ;  Chain DMA3 and DMA2
CHAIN10         __z8bit DMACTL,0        ;  Chain DMA1 and DMA0

;----------------------------------------------------------------------------
; LCD

LCDSA           sfr     0fb1h           ; LCD Subaddress
LCDSD           sfr     0fb2h           ; LCD Subdata
LCDCLK          sfr     0fb3h           ; LCD Clock
CLKSEL          __z8bit LCDCLK,7        ;  LCD Clock Selection
LCD_PRESCALE    __z8bfield LCDCLK,4,3   ;  LCD Clock Prescale Divider
FDIV            __z8bfield LCDCLK,0,4   ;  Frame Divider
LCDCTL0         sfr     0fb4h           ; LCD Control 0
BDIV            __z8bfield LCDCTL0,3,5  ;  Blinking Divider Ratio
BMODE           __z8bfield LCDCTL0,1,2  ;  Blinking Mode
LCDCTL1         sfr     0fb5h           ; LCD Control 1
HBDDUR          __z8bfield LCDCTL1,5,3  ;  Higher Bias Drive Duration
CPEN            __z8bit LCDCTL1,4       ;  Charge Pump Enable
BIASGSEL        __z8bit LCDCTL1,3       ;  Bias Generator Selection
CONTRAST        __z8bfield LCDCTL1,0,3  ;  Contrast Control
LCDCTL2         sfr     0fb6h           ; LCD Control 2
MSTAT           __z8bit LCDCTL2,7       ;  LCD Memory Status
IRQS            __z8bit LCDCTL2,6       ;  Interrupt Request Select
LCDMODE         __z8bfield LCDCTL2,2,4  ;  LCD Operating Mode
DMMODE          __z8bfield LCDCTL2,0,2  ;  Display Memory Mode
LCDCTL3         sfr     0fb7h           ; LCD Control 3
CPTSEL          __z8bit LCDCTL3,6       ;  Charge Pump Type Select
VLCDDIR         __z8bit LCDCTL3,5       ;  VLCD Direction
WGENEN          __z8bit LCDCTL3,4       ;  Waveform Generator Enable

;----------------------------------------------------------------------------
; AES Unit

AESDATA         sfr     0fb8h           ; AES Data
AESIV           sfr     0fb8h           ; AES Initialization Vector
AESKEY          sfr     0fb9h           ; AES Key
AESCTL          sfr     0fbah           ; AES Control
AUTODIS         __z8bit AESCTL,1        ;  Auto-Start Mode Disable
IRQ             __z8bit AESCTL,5        ;  Interrupt Control
AESMODE         __z8bfield AESCTL,3,2   ;  Confidentiality Mode Select
IVEN            __z8bit AESCTL,2        ;  Initialization Vector Enable
DECRYPT         __z8bit AESCTL,1        ;  Decryption/Encryption Select
AESEN           __z8bit AESCTL,0        ;  AES Enable
AESSTAT         sfr     0fbbh           ; AES Status
START_BUSY      __z8bit AESSTAT,7       ;  AES Start/Busy Status
ERROR           __z8bit AESSTAT,3       ;  ERROR Status
IVLD            __z8bit AESSTAT,2       ;  Initialization Vector Load Status
KEYLD           __z8bit AESSTAT,1       ;  Key Load Status
DATALD          __z8bit AESSTAT,0       ;  Data Load Status

;----------------------------------------------------------------------------
; LDD UART

__defldduart    macro   NUM,Base
U{NUM}TXD       sfr     Base+0          ; LIN UART Transmit Data
U{NUM}RXD       sfr     Base+0          ; LIN UART Receive Data
U{NUM}STAT0     sfr     Base+1          ; LIN UART Status 0
U{NUM}RDA       __z8bit U{NUM}STAT0,7   ;  Receive Data Available (LIN+UART+DALI+DMX)
U{NUM}PE        __z8bit U{NUM}STAT0,6   ;  Parity Error (UART)
U{NUM}PLE       __z8bit U{NUM}STAT0,6   ;  Physical Layer Error (LIN)
U{NUM}BPE       __z8bit U{NUM}STAT0,6   ;  Biphase Error (DALI)
U{NUM}OE        __z8bit U{NUM}STAT0,5   ;  Overrun Error (LIN+UART+DALI+DMX)
U{NUM}FE        __z8bit U{NUM}STAT0,4   ;  Framing Error (LIN+UART+DALI)
U{NUM}BRKD      __z8bit U{NUM}STAT0,3   ;  Break Detect (LIN+UART+DMX)
U{NUM}CLSN      __z8bit U{NUM}STAT0,3   ;  Collision Detect Error (DALI)
U{NUM}TDRE      __z8bit U{NUM}STAT0,2   ;  Transmitter Data Register Empty (LIN+UART+DALI+DMX)
U{NUM}TXE       __z8bit U{NUM}STAT0,1   ;  Transmitter Empty (LIN+UART+DALI+DMX)
U{NUM}CTS       __z8bit U{NUM}STAT0,0   ;  Clear to Send Signal (UART+DALI+DMX)
U{NUM}ATB       __z8bit U{NUM}STAT0,0   ;  LIN Slave Autobaud Complete (LIN)
U{NUM}CTL0      sfr     Base+2          ; LIN UART Control 0
U{NUM}TEN       __z8bit U{NUM}CTL0,7    ;  Transmit Enable
U{NUM}REN       __z8bit U{NUM}CTL0,6    ;  Receive Enable
U{NUM}CTSE      __z8bit U{NUM}CTL0,5    ;  Clear To Send Enable
U{NUM}PEN       __z8bit U{NUM}CTL0,4    ;  Parity Enable
U{NUM}PSEL      __z8bit U{NUM}CTL0,3    ;  Parity Select
U{NUM}SBRK      __z8bit U{NUM}CTL0,2    ;  Send Break
U{NUM}STOP      __z8bit U{NUM}CTL0,1    ;  Stop Bit Select
U{NUM}LBEN      __z8bit U{NUM}CTL0,0    ;  Loop Back Enable
U{NUM}CTL1      sfr     Base+3          ; LIN UART Control 1
U{NUM}MPMD1     __z8bit U{NUM}CTL1,7    ;  Multiprocessor Mode (MSEL=000)
U{NUM}MPEN      __z8bit U{NUM}CTL1,6    ;  Multiprocessor Enable (MSEL=000)
U{NUM}MPMD0     __z8bit U{NUM}CTL1,5    ;  Multiprocessor Mode (MSEL=000)
U{NUM}MPBT      __z8bit U{NUM}CTL1,4    ;  Multiprocessor Bit Transmit (MSEL=000)
U{NUM}DEPOL     __z8bit U{NUM}CTL1,3    ;  Driver Enable Polarity (MSEL=000)
U{NUM}BRGCTL    __z8bit U{NUM}CTL1,2    ;  Baud Rate Generator Control (MSEL=000)
U{NUM}RDAIRQ    __z8bit U{NUM}CTL1,1    ;  Receive Data Interrupt (MSEL=000)
U{NUM}NFEN      __z8bit U{NUM}CTL1,7    ;  Noise Filter Enable (MSEL=001)
U{NUM}NFCTL     __z8bfield U{NUM}CTL1,4,3 ;  Noise Filter Control (MSEL=001)
U{NUM}LMST      __z8bit U{NUM}CTL1,7    ;  LIN MASTER Mode (MSEL=010)
U{NUM}LSLV      __z8bit U{NUM}CTL1,6    ;  LIN SLAVE Mode (MSEL=010)
U{NUM}ABEN      __z8bit U{NUM}CTL1,5    ;  Autobaud Enable (MSEL=010)
U{NUM}ABIEN     __z8bit U{NUM}CTL1,4    ;  Autobaud Interrupt Enable (MSEL=010)
U{NUM}LinState  __z8bfield U{NUM}CTL1,2,2 ;  LIN State Machine (MSEL=010)
U{NUM}TxBreakLength __z8bfield U{NUM}CTL1,0,2 ;  TxBreakLength (MSEL=010)
U{NUM}MULTTXE   __z8bit U{NUM}CTL1,7    ;  Multiple-Byte Transmit Enable (MSEL=100)
U{NUM}MULTRXE   __z8bit U{NUM}CTL1,6    ;  Multiple-Byte Receive Enable (MSEL=100)
U{NUM}BPEN      __z8bit U{NUM}CTL1,5    ;  Biphase Encoding Enable (MSEL=100)
U{NUM}BPENC     __z8bit U{NUM}CTL1,4    ;  Biphase Encoding (MSEL=100)
U{NUM}STRTPOL   __z8bit U{NUM}CTL1,3    ;  Start Bit Polarity (MSEL=100)
U{NUM}BITORD    __z8bit U{NUM}CTL1,2    ;  Bit Order (MSEL=100)
U{NUM}CLSNE     __z8bit U{NUM}CTL1,1    ;  Collision Detection Enable (MSEL=100)
U{NUM}PARTRXE   __z8bit U{NUM}CTL1,0    ;  Partial Byte Reception Enable (MSEL=100)
U{NUM}DMXMST    __z8bit U{NUM}CTL1,7    ;  DMX Master Mode (MSEL=101)
U{NUM}DMXSLV    __z8bit U{NUM}CTL1,6    ;  DMX Slave Mode (MSEL=101)
U{NUM}DMXSIRQ   __z8bfield U{NUM}CTL1,4,2 ;  DMX Slave Interrupt Control (MSEL=101)
U{NUM}AUTOBRK   __z8bit U{NUM}CTL1,2    ;  Automatic Break (MSEL=101)
U{NUM}WFBRK     __z8bit U{NUM}CTL1,1    ;  Wait for Break (MSEL=101)
U{NUM}COMP_ADDR8 __z8bit        U{NUM}CTL1,0    ;  Comparison Address bit 8 (MSEL=101)
U{NUM}MDSTAT    sfr     Base+4          ; LIN UART Mode Select and Status
U{NUM}MSEL      __z8bfield U{NUM}MDSTAT,5,3 ;  Mode Select
U{NUM}MODESTAT __z8bfield U{NUM}MDSTAT,0,5 ;  Mode Status
U{NUM}ADDR      sfr     Base+5          ; UART Address Compare
U{NUM}BRH       sfr     Base+6          ; UART Baud Rate High Byte
U{NUM}BRL       sfr     Base+7          ; UART Baud Rate Low Byte
U{NUM}BR        sfr     U{NUM}BRH
                endm

                __defldduart "0",0f40h
                __defldduart "1",0f48h

;----------------------------------------------------------------------------
; I2C

I2CDATA         sfr     0f50h           ; I2C Data
I2CSTAT         sfr     0f51h           ; I2C Status
I2C_TDRE        __z8bit I2CSTAT,7       ;  Transmit Data Register Empty
RDRF            __z8bit I2CSTAT,6       ;  Receive Data Register Full
SAM             __z8bit I2CSTAT,5       ;  Slave Address Match
GCA             __z8bit I2CSTAT,4       ;  General Call Address
RD              __z8bit I2CSTAT,3       ;  Read
ARBLST          __z8bit I2CSTAT,2       ;  Arbitration Lost
SPRS            __z8bit I2CSTAT,1       ;  Stop/Restart Condition Interrupt
NCKI            __z8bit I2CSTAT,0       ;  NACK Interrupt
I2CCTL          sfr     0f52h           ; I2C Control
IEN             __z8bit I2CCTL,7        ;  I2C Enable
SSTART          __z8bit I2CCTL,6        ;  Send Start Condition
SSTOP           __z8bit I2CCTL,5        ;  Send Stop Condition
BIRQS           __z8bit I2CCTL,4        ;  Baud Rate Generator Interrupt Request
TXI             __z8bit I2CCTL,3        ;  Enable TDRE interrupts
NAK             __z8bit I2CCTL,2        ;  Send NAK
FLUSH           __z8bit I2CCTL,1        ;  Flush Data
FILTEN          __z8bit I2CCTL,0        ;  I2C Signal Filter Enable
I2CBRH          sfr     0f53h           ; I2C Baud Rate High Byte
I2CBRL          sfr     0f54h           ; I2C Baud Rate Low Byte
I2CBR           sfr     I2CBRH
I2CSTATE        sfr     0f55h           ; I2C State
I2CSTATE_H      __z8bfield I2CSTATE,4,4 ;  I2C State (DIAG=1)
I2CSTATE_L      __z8bfield I2CSTATE,0,4 ;  Least Significant Nibble of the I2C State Machine (DIAG=1)
ACKV            __z8bit I2CSTATE,7      ;  ACK Valid (DIAG=0)
ACK             __z8bit I2CSTATE,6      ;  Acknowledge (DIAG=0)
AS              __z8bit I2CSTATE,5      ;  Address State (DIAG=0)
DS              __z8bit I2CSTATE,4      ;  Data State (DIAG=0)
I10B            __z8bit I2CSTATE,3      ;  10B (DIAG=0)
RSTR            __z8bit I2CSTATE,2      ;  RESTART (DIAG=0)
SCLOUT          __z8bit I2CSTATE,1      ;  Serial Clock Output (DIAG=0)
BUSY            __z8bit I2CSTATE,0      ;  I2C Bus Busy (DIAG=0)
I2CMODE         sfr     0f56h           ; I2C Mode
DMAIF           __z8bit I2CMODE,7       ;  DMA Interface Mode
I2COPMODE       __z8bfield I2CMODE,5,2  ;  Selects the I2C Controller Operational Mode
IRM             __z8bit I2CMODE,4       ;  Interactive Receive Mode
GCE             __z8bit I2CMODE,3       ;  General Call Address Enable
SLA             __z8bfield I2CMODE,1,2  ;  Slave Address Bits 9 and 8
DIAG            __z8bit I2CMODE,0       ;  Diagnostic Mode
I2CSLVAD        sfr     0f57h           ; I2C Slave Address Register

;----------------------------------------------------------------------------
; USB

USBSA           sfr     0f59h           ; USB Subaddress
ADDRSEL         __z8bit USBSA,7         ;  Addressing Select
USBSD           sfr     0f5ah           ; USB Subdata
USBCTL          sfr     0f5bh           ; USB Control
AI              __z8bit USBCTL,6        ;  Addressing Select
EPSEL           __z8bfield USBCTL,3,3   ;  Endpoint Select
USBDMA0CTL      sfr     0f5ch           ; USB DMA 0 Control
EPSEL0          __z8bfield USBDMA0CTL,3,3 ; End Point Buffer Select  
STARTDMA0       __z8bit USBDMA0CTL,0    ;  Start DMA
USBDMA1CTL      sfr     0f5dh           ; USB DMA 1 Control
EPSEL1          __z8bfield USBDMA0CTL,3,3 ; End Point Buffer Select  
STARTDMA1       __z8bit USBDMA0CTL,0    ;  Start DMA
USBDMADATA      sfr     0f5eh           ; USB DMA Data
USBIRQCTL       sfr     0f5fh           ; USB Interrupt Control
RIRQE           __z8bit USBIRQCTL,1     ;  Resume Interrupt Request Enable
WAKEUP          __z8bit USBIRQCTL,0     ;  Wake-Up (Device-Initiated Resume)

USBO1ADDR       equ     01h             ; USB OUT Endpoint 1 Start Address Subregister
USBO2ADDR       equ     02h             ; USB OUT Endpoint 2 Start Address Subregister
USBO3ADDR       equ     03h             ; USB OUT Endpoint 3 Start Address Subregister
USBISTADDR      equ     08h             ; USB IN Endpoints Start Address Subregister
INSTADDR        __z8bfield USBSD,0,7    ;  IN Start Address
USBI1ADDR       equ     09h             ; USB IN Endpoint 1 Start Address Subregister
USBI2ADDR       equ     0ah             ; USB IN Endpoint 2 Start Address Subregister
USBI3ADDR       equ     0bh             ; USB IN Endpoint 3 Start Address Subregister
USBCLKGATE      equ     10h             ; USB Clock Gate Subregister
USBIID          equ     28h             ; USB Interrupt Identification Subregister
IID             __z8bfield USBSD,2,5    ;  Interrupt Identification (Source)
USBINIRQ        equ     29h             ; USB IN Interrupt Request Subregister
IN3IRQ          __z8bit USBSD,3         ;  IN Endpoint 3 Interrupt Request
IN2IRQ          __z8bit USBSD,2         ;  IN Endpoint 2 Interrupt Request
IN1IRQ          __z8bit USBSD,1         ;  IN Endpoint 1 Interrupt Request
IN0IRQ          __z8bit USBSD,0         ;  IN Endpoint 0 Interrupt Request
USBOUTIRQ       equ     2ah             ; USB OUT Interrupt Request Subregister
OUT3IRQ         __z8bit USBSD,3         ;  OUT Endpoint 3 Interrupt Request
OUT2IRQ         __z8bit USBSD,2         ;  OUT Endpoint 2 Interrupt Request
OUT1IRQ         __z8bit USBSD,1         ;  OUT Endpoint 1 Interrupt Request
OUT0IRQ         __z8bit USBSD,0         ;  OUT Endpoint 0 Interrupt Request
USBIRQ          equ     2bh             ; USB Protocol Interrupt Request Subregister
URESIRQ         __z8bit USBSD,4         ;  USB Reset Bus State Interrupt Request
SUSPIRQ         __z8bit USBSD,3         ;  USB Suspend Interrupt Request
SUTOKIRQ        __z8bit USBSD,2         ;  USB Setup Token Interrupt Request
SOFIRQ          __z8bit USBSD,1         ;  USB Start-of-Frame Interrupt Request
SUDAVIRQ        __z8bit USBSD,0         ;  USB Setup Stage Data Valid Interrupt Request
USBINIEN        equ     2ch             ; USB IN Interrupt Enable Subregister
IN3IEN          __z8bit USBSD,3         ;  IN Endpoint 3 Interrupt Enable
IN2IEN          __z8bit USBSD,2         ;  IN Endpoint 2 Interrupt Enable
IN1IEN          __z8bit USBSD,1         ;  IN Endpoint 1 Interrupt Enable
IN0IEN          __z8bit USBSD,0         ;  IN Endpoint 0 Interrupt Enable
USBOUTIEN       equ     2dh             ; USB OUT Interrupt Enable Subregister
OUT3IEN         __z8bit USBSD,3         ;  OUT Endpoint 3 Interrupt Enable
OUT2IEN         __z8bit USBSD,2         ;  OUT Endpoint 2 Interrupt Enable
OUT1IEN         __z8bit USBSD,1         ;  OUT Endpoint 1 Interrupt Enable
OUT0IEN         __z8bit USBSD,0         ;  OUT Endpoint 0 Interrupt Enable
USBIEN          equ     2eh             ; USB Protocol Interrupt Enable Subregister
URESIEN         __z8bit USBSD,4         ;  USB Reset Bus State Interrupt Enable
SUSPIEN         __z8bit USBSD,3         ;  USB Suspend Interrupt Enable
SUTOKIEN        __z8bit USBSD,2         ;  USB Setup Token Interrupt Enable
SOFIEN          __z8bit USBSD,1         ;  USB Start-of-Frame Interrupt Enable
SUDAVIEN        __z8bit USBSD,0         ;  USB Setup Stage Data Valid Interrupt Enable
USBEP0CS        equ     34h             ; USB Endpoint 0 Control and Status Subregister
CHGSET          __z8bit USBSD,5         ;  Setup Buffer Contents Changed
DSTALL          __z8bit USBSD,4         ;  EP0 Data Stall
OUTBUSY0        __z8bit USBSD,3         ;  EP0 OUT Busy Status
INBUSY0         __z8bit USBSD,2         ;  EP0 IN Busy Status
HSNAK           __z8bit USBSD,1         ;  EP0 Handshake NA
STALL0          __z8bit USBSD,0         ;  EP0 Stall
USBI0BC         equ     35h             ; USB IN 0 Byte Count Subregister
USBI1BC         equ     37h             ; USB IN 1 Byte Count Subregister
USBI2BC         equ     39h             ; USB IN 2 Byte Count Subregister
USBI3BC         equ     3bh             ; USB IN 3 Byte Count Subregister
USBI1CS         equ     36h             ; USB IN 1 Control and Status Subregister
USBI2CS         equ     38h             ; USB IN 2 Control and Status Subregister
USBI3CS         equ     3ah             ; USB IN 3 Control and Status Subregister
INBUSYn         __z8bit USBSD,1         ;  IN Busy Status
STALLn          __z8bit USBSD,0         ;  IN Stall
USBO0BC         equ     45h             ; USB OUT 0 Byte Count Subregister
USBO1BC         equ     47h             ; USB OUT 1 Byte Count Subregister
USBO2BC         equ     49h             ; USB OUT 2 Byte Count Subregister
USBO3BC         equ     4bh             ; USB OUT 3 Byte Count Subregister
USBO1CS         equ     46h             ; USB OUT 1 Control and Status Subregister
USBO2CS         equ     48h             ; USB OUT 2 Control and Status Subregister
USBO3CS         equ     4ah             ; USB OUT 3 Control and Status Subregister
OUTBUSYn        __z8bit USBSD,1         ;  OUT Busy Status
OUTSTALL        __z8bit USBSD,0         ;  Out Stall
USBCS           equ     56h             ; USB Control and Status Subregister
DEVRSUME        __z8bit USBSD,7         ;  Wake-Up Source
SOFWDOG         __z8bit USBSD,5         ;  Start of Frame (SOF) Watchdog
DISCON          __z8bit USBSD,3         ;  Disconnect the Internal Pull-Up Resistor
FORCEJ          __z8bit USBSD,1         ;  Force the Data J Bus State
SIGRSUME        __z8bit USBSD,0         ;  Signal Remote Device Resume
USBTOGCTL       equ     57h             ; USB Toggle Control Subregister
DATA            __z8bit USBSD,7         ;  Data Toggle Value
TDATA1          __z8bit USBSD,6         ;  Set Data Toggle to Data1
TDATA0          __z8bit USBSD,5         ;  Clear Data Toggle to Data0
INOUT           __z8bit USBSD,4         ;  IN/OUT Endpoint Select
EP              __z8bfield USBSD,0,2    ;  Endpoint Select
USBFCL          equ     58h             ; USB Frame Count Low Subregister
USBFCH          equ     59h             ; USB Frame Count High Subregister
USBFNADDR       equ     5bh             ; USB Function Address Subregister
USBPAIR         equ     5dh             ; USB Endpoint Pairing Subregister
PROUT23         __z8bit USBSD,3         ;  OUT 2 and OUT 3 Pairing
PRIN23          __z8bit USBSD,0         ;  IN 2 and IN 3 Pairing
USBINVAL        equ     5eh             ; USB IN Endpoint Valid Subregister
IN3VAL          __z8bit USBSD,3         ;  IN 3 Endpoint Valid
IN2VAL          __z8bit USBSD,2         ;  IN 2 Endpoint Valid
IN1VAL          __z8bit USBSD,1         ;  IN 1 Endpoint Valid
IN0VAL          __z8bit USBSD,0         ;  IN 0 Endpoint Valid
USBOUTVAL       equ     5fh             ; USB OUT Endpoint Valid Subregister
OUT3VAL         __z8bit USBSD,3         ;  OUT 3 Endpoint Valid
OUT2VAL         __z8bit USBSD,2         ;  OUT 2 Endpoint Valid
OUT1VAL         __z8bit USBSD,1         ;  OUT 1 Endpoint Valid
OUT0VAL         __z8bit USBSD,0         ;  OUT 0 Endpoint Valid
USBISPADDR      equ     62h             ; USB IN Endpoints Stop Address Subregister
USBSU0          equ     68h             ; USB Setup Buffer Byte 0 Subregister
USBSU1          equ     69h             ; USB Setup Buffer Byte 1 Subregister
USBSU2          equ     6ah             ; USB Setup Buffer Byte 2 Subregister
USBSU3          equ     6bh             ; USB Setup Buffer Byte 3 Subregister
USBSU4          equ     6ch             ; USB Setup Buffer Byte 4 Subregister
USBSU5          equ     6dh             ; USB Setup Buffer Byte 5 Subregister
USBSU6          equ     6eh             ; USB Setup Buffer Byte 6 Subregister
USBSU7          equ     6fh             ; USB Setup Buffer Byte 7 Subregister

;----------------------------------------------------------------------------
; ESPI

__defespi       macro   NUM,Base
ESPI{NUM}DATA   sfr     0f60h           ; ESPI Data
ESPI{NUM}TDCR   sfr     0f61h           ; ESPI Transmit Data Command
CRDR{NUM}       __z8bit ESPI{NUM}TDCR,7 ;  Clear Receive Data Register
TEOF{NUM}       __z8bit ESPI{NUM}TDCR,1 ;  Transmit End of Frame
SSV{NUM}        __z8bit ESPI{NUM}TDCR,0 ;  Slave Select Value
ESPI{NUM}CTL    sfr     0f62h           ; ESPI Control
DIRQS{NUM}      __z8bit ESPI{NUM}CTL,7  ;  Data Interrupt Request Select
ESPIEN1{NUM}    __z8bit ESPI{NUM}CTL,6  ;  ESPI Enable and Direction Control
BRGCTL{NUM}     __z8bit ESPI{NUM}CTL,5  ;  Baud Rate Generator Control
PHASE{NUM}      __z8bit ESPI{NUM}CTL,4  ;  Phase Select
CLKPOL{NUM}     __z8bit ESPI{NUM}CTL,3  ;  Clock Polarity
WOR{NUM}        __z8bit ESPI{NUM}CTL,2  ;  Wire-OR (Open-Drain) Mode Enabled
MMEN{NUM}       __z8bit ESPI{NUM}CTL,1  ;  ESPI MASTER Mode Enable
ESPIEN0{NUM}    __z8bit ESPI{NUM}CTL,0  ;  ESPI Enable and Direction Control
ESPI{NUM}MODE   sfr     0f63h           ; ESPI Mode
SSMD{NUM}       __z8bfield ESPI{NUM}MODE,5,3    ;  Slave Select Mode
NUMBITS{NUM}    __z8bfield ESPI{NUM}MODE,2,3    ;  Number of Data Bits Per Character to Transfer
SSIO{NUM}       __z8bit ESPI{NUM}MODE,1 ;  Slave Select I/O
SSPO{NUM}       __z8bit ESPI{NUM}MODE,0 ;  Slave Select Polarity
ESPI{NUM}STAT   sfr     0f64h           ; ESPI Status
TDRE{NUM}       __z8bit ESPI{NUM}STAT,7 ;  Transmit Data Register Empty
TUND{NUM}       __z8bit ESPI{NUM}STAT,6 ;  Transmit Underrun
COL{NUM}        __z8bit ESPI{NUM}STAT,5 ;  Collision
ABT{NUM}        __z8bit ESPI{NUM}STAT,4 ;  SLAVE Mode Transaction Abort
ROVR{NUM}       __z8bit ESPI{NUM}STAT,3 ;  Receive Overrun
RDRNE{NUM}      __z8bit ESPI{NUM}STAT,2 ;  Receive Data Register Not Empty
TFST{NUM}       __z8bit ESPI{NUM}STAT,1 ;  Transfer Status
SLAS{NUM}       __z8bit ESPI{NUM}STAT,0 ;  Slave Select
ESPI{NUM}STATE  sfr     0f65h           ; ESPI State
SCKI{NUM}       __z8bit ESPI{NUM}STATE,7        ;  Serial Clock Input
SDI{NUM}        __z8bit ESPI{NUM}STATE,6        ;  Serial Data Input
ESPI{NUM}BRH    sfr     0f66h           ; ESPI Baud Rate High Byte
ESPI{NUM}BRL    sfr     0f67h           ; ESPI Baud Rate Low Byte
ESP{NUM}IBR     sfr     ESPI{NUM}BRH
                endm
                
                __defespi "0",0f60h
                __defespi "1",0f68h

;----------------------------------------------------------------------------
; Analog Comparators

CMPCTL          sfr     0f8fh           ; Comparator Control Register
VBIASEN         __z8bit CMPCTL,7        ;  VBIAS Enable
WINEN           __z8bit CMPCTL,2        ;  Window Mode Enable
CSTATUS         __z8bfield CMPCTL,0,2   ;  Comparator Status
CMP0CTL0        sfr     0f90h           ; Comparator 0 Control 0
CPOWER0         __z8bfield CMP0CTL0,6,2 ;  Comparator Power/Speed Select
HYST0           __z8bfield CMP0CTL0,4,2 ;  Hysteresis Level Select
INNSEL0         __z8bfield CMP0CTL0,2,2 ;  Negative Input Signal Select
INPSEL0         __z8bfield CMP0CTL0,0,2 ;  Positive Input Signal Select
CMP0CTL1        sfr     0f91h           ; Comparator 0 Control 1
POLSEL0         __z8bit CMP0CTL1,7      ;  Polarity Select
PREFEN0         __z8bit CMP0CTL1,6      ;  Programmable Reference Enable
PREFSRC0        __z8bit CMP0CTL1,5      ;  Programmable Reference Source Selection
PREFLVL0        __z8bfield CMP0CTL1,0,5 ;  Programmable Reference Level Selection
CMP1CTL0        sfr     0f92h           ; Comparator 1 Control 0
CPOWER1         __z8bfield CMP1CTL0,6,2 ;  Comparator Power/Speed Select
HYST1           __z8bfield CMP1CTL0,4,2 ;  Hysteresis Level Select
INNSEL1         __z8bfield CMP1CTL0,2,2 ;  Negative Input Signal Select
INPSEL1         __z8bfield CMP1CTL0,0,2 ;  Positive Input Signal Select
CMP1CTL1        sfr     0f93h           ; Comparator 1 Control 1
POLSEL1         __z8bit CMP1CTL1,7      ;  Polarity Select
PREFEN1         __z8bit CMP1CTL1,6      ;  Programmable Reference Enable
PREFSRC1        __z8bit CMP1CTL1,5      ;  Programmable Reference Source Selection
PREFLVL1        __z8bfield CMP1CTL1,0,5 ;  Programmable Reference Level Selection

;----------------------------------------------------------------------------
; OpAmps

AMPACTL0        sfr     0f94h           ; Op Amp_A Control 0
OUTCTLA         __z8bit AMPACTL0,7      ;  Output Control
INPSELA         __z8bfield AMPACTL0,0,2 ;  Positive Input Signal Select
AMPACTL1        sfr     0f95h           ; Op Amp_A Control 1
GAINA           __z8bfield AMPACTL1,4,4 ;  Internal Voltage Gain Setting
OPOWERA         __z8bit AMPACTL1,3      ;  Op Amp Power/Speed Select
INNSELA         __z8bfield AMPACTL1,0,2 ;  Negative Input Signal Select
AMPBCTL0        sfr     0f96h           ; Op Amp_B Control 0
OUTCTLB         __z8bit AMPBCTL0,7      ;  Output Control
INPSELB         __z8bfield AMPBCTL0,0,2 ;  Positive Input Signal Select
AMPBCTL1        sfr     0f97h           ; Op Amp_B Control 1
IRESSELB        __z8bfield AMPBCTL1,4,2 ;  Current Source Resistor Select
OPOWERB         __z8bit AMPBCTL1,3      ;  Op Amp Power/Speed Select
INNSELB         __z8bit AMPBCTL1,1      ;  Negative Input Signal Select
MODEB           __z8bit AMPBCTL1,0      ;  Mode

;----------------------------------------------------------------------------
; Analog/Digital Converter

ADCCTL0         sfr     0f70h           ; ADC Control 0
START           __z8bfield ADCCTL0,6,2  ;  ADC Start/Busy
ADC_DMACTL      __z8bit ADCCTL0,5       ;  DMA Request Control
ADC_IRQ         __z8bit ADCCTL0,4       ;  Interrupt Control
CONTCONV        __z8bit ADCCTL0,3       ;  Continuous Conversion Enable
AVE             __z8bit ADCCTL0,2       ;  Averaging Enable
AVESAMP         __z8bfield ADCCTL0,0,2  ;  Averaging Samples
ADCCTL1         sfr     0f71h           ; ADC Control 1
ADC_POWER       __z8bfield ADCCTL1,6,2  ;  Power Control
SCAN            __z8bit ADCCTL1,5       ;  Channel Scanning Enable
INMODE          __z8bfield ADCCTL1,3,2  ;  Input Mode
ADC_DFORMAT     __z8bit ADCCTL1,2       ;  Data Format
RESOLUT         __z8bit ADCCTL1,1       ;  ADC Conversion Resolution
ADCCTL2         sfr     0f72h           ; ADC Control 2
ADC_REFSEL      __z8bfield ADCCTL2,6,2  ;  ADC Positive Voltage Reference Select
REFLVL          __z8bfield ADCCTL2,4,2  ;  VBIAS Level Select
ADC_PRESCALE    __z8bfield ADCCTL2,0,4  ;  ADC Clock Prescale Divider
ADCINSH         sfr     0f73h           ; ADC Input Select High
ANAINH          __z8bfield ADCINSH,0,7  ;  Analog Input Selection High
ADCINSL         sfr     0f74h           ; ADC Input Select Low
ANAINL          __z8bfield ADCINSL,0,8  ;  Analog Input Selection Low
ADCOFF          sfr     0f75h           ; ADC Offset Calibration
ADCD_H          sfr     0f76h           ; ADC Data High Byte
ADCD_L          sfr     0f77h           ; ADC Data Low Bits
OVF             __z8bit ADCD_L,0        ;  Overflow Status
ADCD            sfr     ADCD_H
ADCST           sfr     0f78h           ; ADC Sample Time
ST              __z8bfield ADCST,4,4    ;  Sample Time
SST             __z8bfield ADCST,0,4    ;  Sample Settling Time
ADCUWINH        sfr     0f79h           ; ADC Upper Window Threshold High
ADCUWINL        sfr     0f7ah           ; ADC Upper Window Threshold Low
ADCUWIN         sfr     ADCUWINH
ADCLWINH        sfr     0f7bh           ; ADC Lower Window Threshold High
ADCLWINL        sfr     0f7ch           ; ADC Lower Window Threshold Low
ADCLWIN         sfr     ADCLWINH

;----------------------------------------------------------------------------
; Digital/Analog Converter

DACCTL          sfr     0f7dh           ; DAC Control
DAC_POWER       __z8bfield DACCTL,6,2   ;  Power Control
DAC_REFSEL      __z8bfield DACCTL,3,3   ;  DAC Positive Voltage Reference Select
DAC_DFORMAT     __z8bit DACCTL,2        ;  Data Format
DACTRIG         __z8bit DACCTL,1        ;  DAC Triggering
JUSTIFY         __z8bit DACCTL,0        ;  Data Register Justification
DACD_H          sfr     0f7eh           ; DAC Data High
DACD_L          sfr     0f7fh           ; DAC Data Low
DACD            sfr     DACD_H

;----------------------------------------------------------------------------
; Watchdog Timer

RSTSTAT         sfr     0ff0h           ; Reset Status
POR_VBO         __z8bit RSTSTAT,7       ;  Power-On Initiated VBO Reset or General VBO Reset Indicator
STOP            __z8bit RSTSTAT,6       ;  Stop Mode Recovery Indicator
WDT             __z8bit RSTSTAT,5       ;  Watchdog Timer Time-Out Indicator
EXT             __z8bit RSTSTAT,4       ;  External Reset Indicator
LVD             __z8bit RSTSTAT,0       ;  Low-Voltage Detection Indicator
WDTH            sfr     0ff2h           ; Watchdog Timer Reload High Byte
WDTL            sfr     0ff3h           ; Watchdog Timer Reload Low Byte

;----------------------------------------------------------------------------

                restore

                endif                   ; __regf6482inc