| Rev |
Age |
Author |
Path |
Log message |
Diff |
| 1283 |
2025-08-08 17:47:10 |
lvd |
/ |
pentevo: rev D: video output: add ext video/audio connector, set CPLD pins |
|
| 1282 |
2025-08-08 11:39:15 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: video output: remove 373/374 stuff (WIP); fix DA numbering issue |
|
| 1274 |
2025-08-03 18:08:55 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: video output: make new sheet for video outputs |
|
| 1273 |
2025-07-27 16:35:34 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: video output: fix '373 to ACT, correct IC numbers |
|
| 1272 |
2025-07-27 14:05:51 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: new video output with 4bpp |
|
| 1271 |
2025-07-26 10:14:08 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: adding new video output (WIP) |
|
| 1270 |
2025-07-25 18:16:18 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add riser connector with ZX-BUS signals |
|
| 1269 |
2025-07-24 18:47:27 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: move /DOS on the pin freeded by previous commit |
|
| 1268 |
2025-07-24 18:40:58 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: change reset source for IDE (also free FPGA pin), add jumpered 5v in IDE 20th pin, add pulldown to IDE D7 to faster detect absence of any IDE device |
|
| 1263 |
2025-06-15 15:43:19 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add TSOP DRAM to schematics |
|
| 1259 |
2025-06-14 16:55:41 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add SHIELD net, connect DB-xx shields, sdcard shields and mounting holes there |
|
| 1239 |
2025-05-25 20:32:28 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: implemented lopass 30kHz filter, with a model |
|
| 1228 |
2025-05-03 17:04:52 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add pca9555 to control extra address pins of ROM |
|
| 1227 |
2025-05-03 16:03:55 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: replace tlc072 with tlv9162; replace m29f040b to m29f032d; TODO: add pca9555 to control high address pins of flash ic |
|
| 1223 |
2025-04-13 18:28:51 |
lvd |
/ |
pentevo: add datasheets for SS14 and S1A diodes; rev. D: replace linear regulator diodes with S1A |
|
| 1221 |
2025-04-12 23:03:56 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: redoing audio (WIP), add reverse diodes to linear regulators |
|
| 1219 |
2025-04-07 23:21:25 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: start redoing audio part (WIP) |
|
| 1211 |
2025-03-24 22:36:04 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: remove AGND, use GND instead |
|
| 1196 |
2025-03-20 22:55:22 |
lvd |
/kicad/rev_d/ |
pentevo: set NC cross on IC or connectors unconnected pins |
|
| 1195 |
2025-03-18 00:16:44 |
lvd |
/kicad/rev_d/ |
pentevo: add reverse-biased diodes to linear regulators |
|
| 1193 |
2025-03-09 20:52:12 |
lvd |
/kicad/rev_d/ |
pentevo: replace ZX ROM footprint to TSOP32 |
|
| 1192 |
2025-03-09 16:27:56 |
lvd |
/ |
pentevo: replace ft232 to ch340x, add cpu clk to zx-bus, swap agnd/videovcc pins for pal coder; docs: moved datasheets to a folder |
|
| 1191 |
2025-03-02 15:40:37 |
lvd |
/kicad/rev_d/ |
pentevo: add VG93 12v switcher (no 12v until voltages on both +5v and +12v busses are OK) |
|
| 1189 |
2025-02-23 18:36:49 |
lvd |
/kicad/rev_d/ |
pentevo: fix evolIution -> evolution |
|
| 1188 |
2025-02-23 18:21:01 |
lvd |
/kicad/rev_d/ |
pentevo: add 9pin aafp/ac97 audio, change usb conn to type C, add extra SS14 in addition to BAT54C for mega power, replace '245s footprints with TSSOP, add resistors to MREQ/IORQ/RD/WR |
|
| 1187 |
2025-02-23 17:23:06 |
lvd |
/kicad/rev_d/ |
pentevo: fix ALTIUM_VALUE to Value, add microSD card |
|
| 1179 |
2025-01-06 13:44:45 |
chrv |
/kicad/rev_d/ |
fix scheme:
- Remove netbuses;
- Sets ports to global marks. |
|
| 1178 |
2024-12-31 18:14:36 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (AVR) |
|
| 1176 |
2024-12-31 17:31:27 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (serial, power, tape) |
|
| 1175 |
2024-12-31 17:12:42 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (RTC, pgm conns) |
|
| 1173 |
2024-12-31 02:04:54 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (FPGA) |
|
| 1172 |
2024-12-31 01:54:53 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (flash, zxbus) |
|
| 1171 |
2024-12-31 00:21:42 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (Z80) |
|
| 1170 |
2024-12-31 00:15:25 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (resistors, capacitors, regulators, glue logic) |
|
| 1169 |
2024-12-30 23:58:10 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (DRAM) |
|
| 1168 |
2024-12-30 23:48:46 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (AY, video) |
|
| 1167 |
2024-12-30 23:24:07 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (SD) |
|
| 1166 |
2024-12-30 23:15:39 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch (IDE) |
|
| 1165 |
2024-12-30 22:49:36 |
lvd |
/kicad/rev_d/ |
pentevo: small update to converted kicad sch |
|
| 1161 |
2024-12-30 20:38:15 |
lvd |
/ |
pentevo: add initial (converted from pcad) kicad schematics. Not fixed yet, has many conversion disasters |
|