Subversion Repositories pentevo

Rev

Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
1283 2025-08-08 17:47:10 lvd / pentevo: rev D: video output: add ext video/audio connector, set CPLD pins  
1282 2025-08-08 11:39:15 lvd /kicad/rev_d/ pentevo: rev D: video output: remove 373/374 stuff (WIP); fix DA numbering issue  
1274 2025-08-03 18:08:55 lvd /kicad/rev_d/ pentevo: rev D: video output: make new sheet for video outputs  
1273 2025-07-27 16:35:34 lvd /kicad/rev_d/ pentevo: rev D: video output: fix '373 to ACT, correct IC numbers  
1272 2025-07-27 14:05:51 lvd /kicad/rev_d/ pentevo: rev D: new video output with 4bpp  
1271 2025-07-26 10:14:08 lvd /kicad/rev_d/ pentevo: rev D: adding new video output (WIP)  
1270 2025-07-25 18:16:18 lvd /kicad/rev_d/ pentevo: rev D: add riser connector with ZX-BUS signals  
1269 2025-07-24 18:47:27 lvd /kicad/rev_d/ pentevo: rev D: move /DOS on the pin freeded by previous commit  
1268 2025-07-24 18:40:58 lvd /kicad/rev_d/ pentevo: rev D: change reset source for IDE (also free FPGA pin), add jumpered 5v in IDE 20th pin, add pulldown to IDE D7 to faster detect absence of any IDE device  
1263 2025-06-15 15:43:19 lvd /kicad/rev_d/ pentevo: rev D: add TSOP DRAM to schematics  
1259 2025-06-14 16:55:41 lvd /kicad/rev_d/ pentevo: rev D: add SHIELD net, connect DB-xx shields, sdcard shields and mounting holes there  
1239 2025-05-25 20:32:28 lvd /kicad/rev_d/ pentevo: rev D: implemented lopass 30kHz filter, with a model  
1228 2025-05-03 17:04:52 lvd /kicad/rev_d/ pentevo: rev D: add pca9555 to control extra address pins of ROM  
1227 2025-05-03 16:03:55 lvd /kicad/rev_d/ pentevo: rev D: replace tlc072 with tlv9162; replace m29f040b to m29f032d; TODO: add pca9555 to control high address pins of flash ic  
1223 2025-04-13 18:28:51 lvd / pentevo: add datasheets for SS14 and S1A diodes; rev. D: replace linear regulator diodes with S1A  
1221 2025-04-12 23:03:56 lvd /kicad/rev_d/ pentevo: rev D: redoing audio (WIP), add reverse diodes to linear regulators  
1219 2025-04-07 23:21:25 lvd /kicad/rev_d/ pentevo: rev D: start redoing audio part (WIP)  
1211 2025-03-24 22:36:04 lvd /kicad/rev_d/ pentevo: rev D: remove AGND, use GND instead  
1196 2025-03-20 22:55:22 lvd /kicad/rev_d/ pentevo: set NC cross on IC or connectors unconnected pins  
1195 2025-03-18 00:16:44 lvd /kicad/rev_d/ pentevo: add reverse-biased diodes to linear regulators  

←Prev12Next→

Show All