| Rev |
Age |
Author |
Path |
Log message |
Diff |
| 1283 |
2025-08-08 17:47:10 |
lvd |
/ |
pentevo: rev D: video output: add ext video/audio connector, set CPLD pins |
|
| 1282 |
2025-08-08 11:39:15 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: video output: remove 373/374 stuff (WIP); fix DA numbering issue |
|
| 1274 |
2025-08-03 18:08:55 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: video output: make new sheet for video outputs |
|
| 1267 |
2025-07-23 09:36:12 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add 2x SEGA pads through pca9555 |
|
| 1265 |
2025-06-15 16:31:56 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add extra PS2 connector for extenders (like USB-PS2) |
|
| 1264 |
2025-06-15 16:09:19 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add turbosound connector parallel to AY |
|
| 1263 |
2025-06-15 15:43:19 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add TSOP DRAM to schematics |
|
| 1260 |
2025-06-14 17:17:21 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: remove output 100uF cap for AVCC9, 10uF instead |
|
| 1259 |
2025-06-14 16:55:41 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add SHIELD net, connect DB-xx shields, sdcard shields and mounting holes there |
|
| 1258 |
2025-06-14 16:21:52 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: beautify audio schematics page, change vcc_mega to vcc5 convertor for high ROM addrs |
|
| 1239 |
2025-05-25 20:32:28 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: implemented lopass 30kHz filter, with a model |
|
| 1228 |
2025-05-03 17:04:52 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: add pca9555 to control extra address pins of ROM |
|
| 1223 |
2025-04-13 18:28:51 |
lvd |
/ |
pentevo: add datasheets for SS14 and S1A diodes; rev. D: replace linear regulator diodes with S1A |
|
| 1222 |
2025-04-13 14:03:50 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: start redoing audio part (WIP) |
|
| 1221 |
2025-04-12 23:03:56 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: redoing audio (WIP), add reverse diodes to linear regulators |
|
| 1219 |
2025-04-07 23:21:25 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: start redoing audio part (WIP) |
|
| 1215 |
2025-03-26 22:23:46 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: change uSD card LDO to tpa7a2033, which is drop-in replacement for lp2985 with increased max current |
|
| 1213 |
2025-03-26 10:05:46 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: fix uSD card capacitors, replace 2 series resistors with single one, make BAT54c for AVR 'do not populate' instead of SS14, replace 10uF for AVR from tantalum to X7R |
|
| 1211 |
2025-03-24 22:36:04 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: remove AGND, use GND instead |
|
| 1210 |
2025-03-24 20:03:40 |
lvd |
/kicad/rev_d/ |
pentevo: rev D: update footprints for 470uF and 470uH, remove 0R5 resistors |
|