Subversion Repositories pentevo

Rev

Hide changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff Changes
861 2020-02-11 13:31:07 lvd /avr/current/ avr: faster power led blinking in powered on condition, pause before powering on from standby  
/avr/current/atx.c
/avr/current/atx.h
/avr/current/default/zxevo_fw.bin
/avr/current/interrupts.c
855 2020-02-10 00:40:24 lvd /avr/current/ avr: added config loop for the case when CONF_DONE not goes up  
/avr/current/atx.c
/avr/current/default/core.hex
/avr/current/default/zxevo_fw.bin
/avr/current/main.c
854 2020-02-09 19:47:41 lvd /avr/current/ avr: no hang at poweroff with non-ATX power supplies  
/avr/current/atx.c
/avr/current/atx.h
/avr/current/default/core.hex
/avr/current/default/zxevo_fw.bin
/avr/current/interrupts.c
/avr/current/main.c
852 2020-02-09 01:32:23 lvd /avr/current/ avr: fixed poweroff conditions  
/avr/current/atx.c
/avr/current/default/core.hex
/avr/current/default/zxevo_fw.bin
437 2011-06-11 13:50:18 chrv / Release 2011.06.11  
/avr/current/atx.c
/avr/current/default/core.hex
/avr/current/default/zxevo_fw.bin
/avr/current/main.h
/avr/current/pins.h
/avr/current/zx.c
/docs/zxevo_base_configuration.odt
240 2010-09-12 13:59:50 chrv / 1) Add monitors to list
2) F12 not switch off power (only hard reset)		  
/avr/current/atx.c
/avr/current/main.h
/docs/supported_monitors.odt
/docs/zxevo_base_configuration.odt
229 2010-08-26 22:43:01 lvd /avr/current/ fixed f12+5sec no hardreset bug  
/avr/current/atx.c
/avr/current/default/ZXEVO_FW.BIN
/avr/current/default/core.hex
219 2010-08-17 23:12:50 chrv /avr/current/ - "F9","F10","F11" on PS/2 keyboard not used for reset function.
- "F12" on PS/2 keyboard worked like soft reset key. Short press (<5sec) - soft reset, long press (5sec) - hard reset and switch off ATX power.
- "Ctrl-Alt-Del" on PS/2 keyboard reset ZX (hard reset). If all keys is mapped to ZX keyboard - function not work.
- Create translating map (PS/2 to ZX keyboard) in eeprom (default in progmem).
- Fix PS/2 mouse and keyboard send mode (without 'delay' function).
- Support load from tape input.		  
/avr/current/atx.c
/avr/current/atx.h
/avr/current/default/Makefile
/avr/current/default/ZXEVO_FW.BIN
/avr/current/default/core.hex
/avr/current/interrupts.c
/avr/current/main.c
/avr/current/main.h
/avr/current/ps2.c
/avr/current/zx.c
/avr/current/zx.h
179 2010-03-27 19:17:32 chrv /avr/current/ - Add support for get version info (via Gluk cmos extra registers 0xF0..0xFF).
- Optimize sources, some correction (log, fpga load).		  
/avr/current/version.c
/avr/current/version.h
/avr/current/atx.c
/avr/current/default/Makefile
/avr/current/default/ZXEVO_FW.BIN
/avr/current/default/core.hex
/avr/current/depacker_dirty.c
/avr/current/depacker_dirty.h
/avr/current/joystick.c
/avr/current/main.c
/avr/current/main.h
/avr/current/ps2.c
/avr/current/rtc.c
/avr/current/zx.c
172 2010-03-24 22:48:32 chrv / Fix Power Led behavior (it off while atx power off).  
/avr/current/atx.c
/avr/current/default/ZXEVO_FW.BIN
/avr/current/default/core.hex
/avr/current/main.c
/avr/current/main.h
/docs/zxevo_base_configuration.odt
163 2010-03-21 18:41:26 chrv / - "Print Screen" PS2 keyboard key set NMI on ZX.
- Soft reset (Z80 only) to service (0) page if pressed "softreset" key <5 seconds.
- documentation		  
/docs/zxevo_base_configuration.odt
/avr/current/atx.c
/avr/current/default/ZXEVO_FW.BIN
/avr/current/default/core.hex
/avr/current/interrupts.c
/avr/current/main.h
/avr/current/rtc.c
/avr/current/zx.c
/avr/current/zx.h
/rom/zxevo.rom
75 2010-01-23 19:50:51 chrv /avr/current/ support mouse and atx power supply  
/avr/current/atx.c
/avr/current/atx.h
/avr/current/interrupts.c
/avr/current/main.c
/avr/current/pins.h
/avr/current/ps2.c
/avr/current/ps2.h
/avr/current/rtc.h
/avr/current/zx.c
/avr/current/zx.h